Type AO: The Model 408AO-7619 Durometer is designed to measure Type AO hardness per ISO 7619-1 Standard.
This instrument measures the indentation hardness of vulcanized or thermoplastic rubber in low hardness range and cellular rubbers.
The Durometer comes standard with a Magnetic Max Hold hand, which will retain it’s peak reading when needed. The case tapers to a 1″ x 1″ base to allow better access to confined areas and still meet the required minimum base area of 500 mm2. A removable top knob permits both easy handheld use or attachment to a Test Stand.
$995.00
- Max Hold Pointer Standard
- Easy to Read 0 to 100 Point Dial
- Resettable ancillary hand records the peak reading
- Threaded mounting knob permits permanent test stand emplacement
- Accessory Test Stands Available
- Includes Precision Aluminum Test Block
- Carrying Case
| ASTM Scale: | A |
| Standards: | ASTM D2240 |
| Pointer Sweep: | 240º |
| Scale: | 0 — 100, 1 Point Graduations |
| Accuracy: | ± 1 Point |
| Dimensions (H x W x D): | 102 x 57 x 44 mm (4.0 x 2.25 x 1.75 inch) |
| Finish: | Blue Mottled |
| Weight: | 227 g (8 oz.) |
| Presser Foot: | 41.275 x 25.4 mm (1.625 x 1.0 inch) |
PTC Durometer, PTC Durometers, Shore hardness, pocket durometer, Shore scale, hardness, rubber hardness, plastic, plastic hardness, indentation hardness, ebonite, ebonite hardness, rubber hardness testing, rubber testing, hardness testing, durometer hardness, testing, ASTM D2240, D2240, ASTM D1957, ISO 868, ISO 7619, ISO 8517, ISO 7267, ISO 21509, ISO 18517, JIS K6253, JIS K6251, JIS K6252, JIS K 6253, JIS K6254, JIS K6255, JIS K6256, JIS K6257, JIS K6258, JIS K6259, JIS K6260, JIS K7215, DIN 53505, DIN 53 505, CNS, K6898, BS 903, BS 2782, BS ISO 21509, BS EN ISO 868, GB/T 10807, Asker, Asker C, SRIS 0101, MIL-STD-45622A, MIL-I-45208A, MIL-STD-120, 83.060, 83.080, hysteresis, creep, Young’s Modulus.